OMC F1-V8 racing by Charlie Strang
USF1 United States Formula One
The when, where, who and why of the V-8 racing circuit will all be found in the following story.
When we at OMC were developing a V-8 “fishing motor”, circa 1980, we decided to build a racing version of it to replace our Wankel outboards which had been barred from most European races.
Since there were few places to race a 3-1/2 liter outboard in the USA at that time (other than enduros) we decided to race them primarily in Europe. In UIM, the 3-1/2 liters put the V-8 into class OZ (unlimited displacement). At a meeting in Europe the UIM decided OZ would henceforth be known as Formula One. In 1981 the John Player tobacco company of England sponsored the John Player World Championship series for Formula One. There were 10 V-8s running there in 1981, plus a number of Merc V-6 engines.
In the fall of 1982 Bob Spalding realized that the V-8s were running faster in competition than the Class X outboard hydro record—so he ran a Kilo on Lake Windermere in his tunnel boat at 139.66 mph. Not long after, Rick Frost—also of England—ran a Kilo in his F-1 tunnel boat at 144.16.
In those days tunnel boat design had not kept up with the available power and we had 4 deaths in 4 months. This led to the development of the safety cockpit—financially sponsored by both OMC and Mercury—which did a fantastic job of reducing risk.
During 1985 OMC’s European operation had a problem with a race promoter who spent ridiculous sums on F-1—about 3.2 million in one summer! As a result, I pulled the plug on F-1 in Europe for 1986.
This incident, plus all we had spent on racing in the factory battles of the 1970s and early 1980s, convinced me we were not getting our money’s worth out of the sport—with top-notch factory teams holding great races in remote locations—and the publicity was zilch.
We then decided to concentrate on racing the V-8s in the USA—where most large outboards were sold—and to try to fund it with sponsor money. In other words, to use other companies’ money to promote our product through racing.
We hired the top sports promotion company in the USA—or maybe the world—to find sponsors for outboard racing. Four months and $600,000 in fees later they told us that outboard racing was of no interest to the public and sponsorship was not to be had.
We decided to try it anyway, following where possible the example set by car racing. OMC’s VP for Marketing, Ron Ingram, and I decided on a USA Formula One circuit with the following points in mind:
1. We would have a series of 6 to 8 races in the USA, open to drivers from all over the world.
2. It would be an F-1 series with the only limitation being that the engines must be available to anyone on the open market—to avoid the expensive and promotionally useless factory competition of the past. I think we set the required number of engines produced at 50. (This led to an interesting and even amusing lawsuit with Mercury.)
3. Our races would only be held at metropolitan locations with good press facilities.
4. The race would always be held in conjunction with existing major waterfront shows or events to insure a maximum crowd on race days.
5. We would have large prize purses, never before seen in boat racing, to excite the media—and the teams.
We then met with representatives of ABC, NBC and CBS to determine the ideal format. The networks designed a one-hour format for ideal TV coverage. This was the source of the 45 minute feature event—still used today at times.
We found a great series sponsor in Champion Spark Plug who regularly brought their distributors and dealers to the races and who also promoted the F-1 races in their ads. OMC also put much money into each race to make it a top-notch event worthy of media attention.
If I remember rightly, we started the US F-1 series in 1986—with over $600,000 in prize money for 7 races. We had plenty of European teams and plenty of US entrants. Probably the top event each year was Pittsburgh—where the police had a real job keeping the huge crowds in safe viewing areas.
The US F-1 series went on for about 4 years with all the top US and European F-1 drivers involved. There were always a few Mercs in the field, but only Bill Seebold was ever competitive—particularly on the shorter courses where the big V-8 boats had a bit more difficulty on the turns. The speeds were high—on the 1-1/2 mile course at Beaumont, Texas, Ben Robertson set a lap speed record of 141.33 mph. They were great races.
We thought it was a great series—as did the teams and the boating press—but the public interest did not warrant the cost. The TV networks finally told us that the F-1 events were great—but that boat racing simply could not draw enough attention to create adequate advertising income for the networks. As I recall, they commented that car racing could attract huge followings because, at that time, about 150 million Americans had cars and could relate to them—while only about 10 million Americans had boats.
At any rate, it became very clear that what was probably the best outboard racing circuit of all time could not justify its cost in terms of promotion, publicity and sales.
So – in 1990 I pulled the plug on the OMC F-1 circuit and we went to putting the money into grass-roots racing by producing the 2, 3 and 4 cylinder engines for OPC and sponsoring activity for those classes.
Now you know why I smile sadly when I hear a would-be promoter telling how he will make millions by turning some boat-racing class into the “next NASCAR”!
The V-8 Johnsons and Evinrudes are long gone. About all that remains on the record books is Bob Wartinger’s 176.586 mph speed record of 1989—with a V-8 on a three-point hydro.
So who did all this? As I recall, from the technical side, Jim Nerstrom handled the racing version of the V-8 in OMC Marine Engineering, where Edgar Rose was OMC’s VP. Gary Garbrecht and Les Calhoun did a great deal of development work and boat testing at Gary’s Second Effort operation in Florida. Jack Leek, OMC’s race boss had a finger in everything every where.
Bob DeGrenier was the guy who actually set up and ran the events. OMC Marketing guy, Barry Caris, oversaw OMC’s PR and promotional activity and co-ordinated the race setup with DeGrenier.
Charlie Strang
Renato Molinari in his 2 X F1-V8 powered Molinari 1983
Wow..finally I have great pictures of one of the most brutal tunnel boats ever. Renato Molinari in his 2 X F1-V8 powered Molinari he raced in the unlimited hydroplane class. The race was run at Clear Lake outside Houston, Texas 1983.
Thanks to Fabio Porta.
Team Molinari in front of the brutal Molinari boat with twin racing F1-V8 outboards.Renato without a shirt next to Ric McChesney from OMC. Mouse I think on the far right.
Great memories and a perfect timing….
Great memories and a perfect timing by LOZ Screen Printing in Camdenton.
Abby (the owner) called this morning and told me a small number of the newly made classic racing t-shirts Evinrude/Huzells in Sweden made 1973 was ready to be picked up.
This popular t-shirt was sold in the thousands back in 1973/74 and 75 by Evinrude/Huzells.
To dealers, at the boat shows and at the races by me.
There was many colors to pick from back in the seventies.
I made three colors so far.
Huzells also got the famous Abba involved in supporting me and Evinrude. The third picture is ABBA back in 1973 and you can see Bjorn Ulveus is wearing my yellow/blue racing shirt.
July 15 1973 is the day everything changed in my life. By far my best boat racing day ever. The race boat on the t-shirt is the one that made this amazing story possible.
“A Swedish success, “propped into racing” by a Norwegian 1973”
After a few years in the Sport, a big possibility opened up in the winter 1972/73. Hans Holmen who worked for Evinrude Sweden called me and said that Huzells and Evinrude has picked me and one other Swede to get the new Evinrude 65 SS ( for free) that was designed to be a winner in the SE class.
One condition, I have to buy a new SE Cat from Italy. There was two choices, Abbate or Clerici and I picked Clerici without really a good reason.
We where late to order, but Clerici promise to have the boat ready in June that summer, but that was OK because OMC was late with the new 65 SS also.
I friend of mine lent me and older Schultze cat and I used my stock Evinrude 65 hp. At the Swedish Championship in Torsby, Varmland, I ended up around fifth.
Me and my dad Roland took the Coffee delivery truck and headed to Cremona, Italy with a big bag full of Lire (Italian Cash) to pick up the new very good looking cat.
Back to Sweden to install the brand new 65 SS Evinrude, that had just arrived.
There was one big problem, this engine was using left hand props, and there was not many around. I found one 2 blade prop used for the Mercury BP’s, but not very fast at testing.
The big race of the year was the European Championship in Lappeenranta Finland and OMC’s Racing boss Jim Wagner had a lay over in Stockholm, on his way to Finland with Roger Jenkins #56 Clerici/Evinrude boat (last picture). I got the opportunity to test factory driver Roger Jenkins propellers in Sweden and my boat was flying.
This was a 3 blade cleaver left hand rotation and Jim Wagner promised me that if I showed up in Finland he was going to let me use Roger Jenkins spare prop.
Me, Holmen and friend Curre took the ferry to Finland and when we arrived at the race there was 45 boats with Mercury, Carniti, Konigs, Evinrude and Johnson engines, but Roger Jenkins refused to let me borrow any of his/OMC’s propellers.
I was very disappointed and was walking around in the pit, when I ran in to Tor Smith Ingebrittsen from Norway. He had an older home built boat, and he showed me his prop that looked like the one Jenkins used. We made a deal and exchanged props with a handshake.
There was no time for testing and when they dropped the green flag I was flying through the field and after a few laps I lead the race and pulled away. I won the heat with half a lap, and everybody went crazy regarding my prop. Many drivers offered my new friend from Norway lots of money for his prop, that he lent me but he was cool and said it belongs to Lars. Next heat the Italian drivers was trying to run me over in the start, and later pushed me up on one of the turning buoys and I was disqualified and had some damage to the boat but we fixed that overnight.
I do not remember the third heat, but I had to win the last one, and I did.
I was now declared the winner and the new 1973 European Champion, and Jim Wagner was forced to come over to my boat and congratulate me. Lars and his friends had the biggest after race party they have ever seen in Lappeenranta. (Roger Jenkins left early for the airport)
This was the beginning of my professional boat racing carrier and my Outboard Business success.
Thanks to everybody helping me.